For homes with wood technology we have the support and technical advice from members of the Construction Institute (CI) of the FARQ.
At first we met with Mary Calone and Charles Meyer, spoke different foundation options, depending on the slope, if it was saved with dice rolls in, the rolls must be waterproofed with emulsion asf. + Glass wool, adding a key to improve their adhesion to concrete.
We also discussed the types of wood to use and impregnation treatments, which we had to biological control of when we made the request to the cabin, as well as the humidity that has, for it offered to lend us some equipment that measured in terms of conductivity. The woods that were watching could be eucalyptus and pine, both impregnated. Pobablemente
orders for materials that we made and given the time of the quartermaster to regain new orders, will be used dice (all) Horm. Cyclopean for the foundation because there is no place eucalyptus rollers inside.
The second session focused more on the vertical walls and panels on the roof, so we have built prototypes, as 1:2 scale panels that are in the workshop, as proposed TacurĂº Movement, of which we had spoken Duilio A. "We talked about how
modular racks, where and how to put Cloths insulations, thermal, etc. Broadly speaking, glass wool Ais. Tyvek thermal and membrane to isolate. Humid. Also the incorporation of health facilities as well as providing suspends "seen" to faclitar repairs.
-also a possible melamine in the bathroom wall or a plate. Green. gypsum.
"As for the cover, talking about the layers, and the structure but we need to size the beams, belts, clavaderas in function of light loads, wind, etc ... "As" should ", we have also the subject of the subfloor, they have no experience in using mdf as estructutral" folder under the concrete as we have raised, so we were talking, another solution may be in Wood (totally, Br) with insulation in the middle ... (They usually do a traditional subfloor, on the ground, not high from it, as we are proposing in this case)
0 comments:
Post a Comment